Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.

Q: Can I cut my tablet grip to different sizes?

A: Absolutely! Our non-abrasive laptop and tablet grips come are designed to fit all tablets and laptops; however, if you have a device that requires a custom size, you can quickly cut our phone grips to size with any household scissors. 

Q: Is the laptop grip waterproof?
A: Yes! This non-slip tablet & laptop grip is designed to keep up with your active lifestyle and is waterproof, as well as dust, dirt, and lint-resistant. 

Q: Is the tablet grip latex-free?
A: We’re all about protecting your sensitive skin, so yes, we purposefully manufactured our non-rubber laptop and tablet grips to be 100% latex-free. 

Q: Will this grip damage my laptop or tablet?
A: Never! Our non-abrasive laptop and tablet grips will never scratch or damage your device or any surface you might put it down on. 

Q: Is the laptop grip recyclable?
A: We are passionate about protecting our planet. That’s why every laptop and phone grip (and all of our products and packaging, for that matter) is made from 100% recyclable materials.

Q: How do I apply my tablet grip?
A: It's so easy! Make sure the back of your device is clean and free of debris. Peel the backing off the grip and center it above the area you'd like to place it. Place one edge down on your laptop or tablet, then apply gentle pressure across the grip to secure its position.

Q: How do I remove my laptop grip? 
A: When you’re ready for a new look, you can easily peel your grip off. If a slight residue remains, rubbing alcohol can be used to remove it. Then, shop for a new laptop or tablet grip!

• Non-abrasive, meaning that it won’t ruin your device or leave behind any gummy, sticky goo or residue. It won't scratch your furniture, floor, desk, or any other surface you place it on.
• Waterproof, so if your tablet gets too close to the kitchen sink, a cold one spills on your laptop, or you get caught in a freak rainstorm, your tablet or laptop grip will stay put.
• Made with HDPE plastic, a soft & lightweight, flexible, super-strong, impact-resistant high-density polyethylene plastic whose grip is superior to rubber & latex.
• Eco-friendly; unlike most other plastics & adhesive materials, HDPE is recyclable & doesn’t end up in landfills.
• Allergy-and-irritant-free; another advantage of HDPE is that our phone grips won't irritate your skin or your hands when you touch it; and, unlike latex (which you’ll find in every rubber grip), it is 100% allergy-free.
• Made by the #1 manufacturer of non-slip products. Simply put, this product is proven to perform.

Compatibility: Our non-slip tablet and laptop grips adhere to any slick surface and won’t interfere with wireless chargers or magnetic mounts. Please note that we do not recommend CatTongue Grips for use with cases that are made out of leather, suede or fabric.

Dimensions: Phat Cat table and laptop grips are 5” (12.7 cm) x 8” (20.32 cm) and fit iPad Pro, iPad Air, iPad + ALL other tablets, along with all laptops and larger electronics.